Planet IPX-1000, Руководство пользователя

Страница: 74 / 78

70
Dial ＃
30
：
Password Changing(4 digit)
Hint You can assign a password for IPX system by dialing “ #30XXXX ” . The voice will ask you to
enter 4-digit number to change the factory value of the system.
Dial
＃
33
：
Reset(S
：
0=reset the password to ‘ 0000 ’
；
S
：
1=clear the data and setting of the
extension)
Hint The command “ #33XXXX ” is used to clear the data like recording and voice mail on your
extension. There are two selections. “ 0 ” is changing the extension ’ s password to the default
value “ 0000 ” , but keep the data and setting on the extension. “ 1 ” is not only change the
password to default value “ 0000 ” but all information will be changed to factory value that
include recording and voice mail.
Dial
＃
43
：
Record/Review Off-Duty System Greeting Message
Hint Maximum recording time is 60 seconds. When you are finished, carefully hang up the phone
in order to minimize the noise at the end. To review the off-duty system-greeting message,
enter “ #43 ” alone without the system password. The message will be played after about 2
seconds.
Dial
＃
49
：
Record/Review On-Duty System Greeting Message
Hint Maximum recording time is 60 seconds. When you are finished, carefully hang up the phone
in order to minimize the noise at the end. To review the off-duty system-greeting message,
enter “ #49 ” alone without the system password. The message will be played after about 2
seconds.
Introduction of the Useful Command
How to listen your voice mail?
Hint
On your desk
à
dial “
＊
2 ”
à
follow the process system ask
At the other desk
à
dial “
＊
2 ”
à
enter your extension number
à
follow the process system
ask
At the outside party
à
after hearing IVR, please dial “
＊
2 ”
à
enter your extension number
à
follow the process system ask
The process of enter the voice mail:
Dial “ 1 ”
：
leave the massage for master
．