Planet IPX-1000, Руководство пользователя

Страница: 29 / 78

25
Domain Name Please insert the domain name of the IPX-1000.
Router IP
Please insert the router ’ s IP address of the IPX-1000.
If you want to use IPX-1000 ’ s internal router, please insert the IPX-1000 ’ s LAN
IP address here, or use another router on the LAN then insert its IP address
here instead.
Assignment IP range
1
Please insert the first IP address range. The values must be within 1 ~ 254,
and the end value must be greater than the start value.
Note that the first three numbers (unchangeable) should be the same as the
first three numbers of IPX-1000
’ s LAN IP address. If not, then you must
correct IPX-1000 ’ s LAN IP address setting first.
Assignnment IP range
2
Please insert the second IP address range. The DHCP server will start to use
the second range only after the first range is all used up. If you don
’ t need to
use the second range, please instert zero for both the start value and the end
value.
DNS server 1st
Please insert the first (or the only) DNS server ’ s IP address. If this IP address
is set incorrectly, your PC will not be able to access web sites via domain
names.
DNS Server 2st
Please insert the second DNS server ’ s IP address. This IP address is optional.
If you don ’ t need to uset the 2nd DNS server, please insert zero for the 2nd
DNS server.
DONE
Clicking ing on the DONE button to apply the changes. After clicking ing on the DONE button, the
system refuses to save the changes (reverting back to the old settings), then you need to request a
new IP address for your PC from the DHCP server.
To request a new IP address from the DHCP server, follow these steps:
1. Open the Command Prompt window (sometimes called DOS window) from Windows.
2. If you are using Windows 95/98, enter “ ipconfig /release_all ” . After the command is completed,
enter “ ipconfig /renew_all ” .
3. If you are using Windows 2000/XP, enter “ ipconfig /release ” . After the command is completed,
enter “ ipconfig /renew ” .
4.
If you want to know your PC ’ s new IP address, enter “ ipconfig ” .
Internet Sharing
This page allows you to enable the Private IP address and no need to apply from your MIS, but you
must responsible that the routing information out gone to the other network. The benefit of the Private
IP address is can be shared with different party for saving IP number.