HDMI / Video Wall over IP
IHD-200 Series
29
2. 1 x 2 video wall
If you want to set a 1 x 2 “video wall” as following picture, you may refer to the
following table and see the steps below.
OSD
0
1
Vertical Monitor Count
1
1
Horizontal Monitor Count
2
2
Row Position
0
0
Column Position
0
1
Step 1
Show OSD
：
Check this item and all monitors will show its number on the screen.
Step 2
Row Position / Column Position
：
Decide which part of the screen will be applied to
a monitor.
Step 3.
Apply To
：
Select one of the clients (OSD number) for the following setting.
Step 4
For all monitors setup, please follow above steps 1 to 3.
After all settings are done, you could uncheck OSD item.
Í
Note