Planet IGS-10020MT Скачать руководство пользователя страница 192

Страница: 192 / 563

User’s Manual of IGS-10020MT

The page includes the following fields:

Object

Description



Tag Classification

Controls the classification mode for tagged frames on this port.

Disabled

: Use default QoS class and DP level for tagged frames.

Enabled

: Use mapped versions of PCP and DEI for tagged frames.



(PCP, DEI) to (QoS

class, DP level)

Mapping

The Configuration All with available values will assign to whole items.

Controls the mapping of the classified (PCP, DEI) to (QoS class, DP level) values

when Tag Classification is set to

Enabled

Buttons

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

: Return to the previous page.

4.9.4 Port Scheduler

This page provides an overview of QoS Egress Port Schedulers for all switch ports. The Port Scheduler screen in

Figure 4-9-4

appears.

Figure 4-9-4:

QoS Egress Port Schedule Page Screenshot

The page includes the following fields:

Object

Description



Port

The logical port for the settings contained in the same row.

Click on the port number in order to configure the schedulers.

For more detail, please refer to chapter 4.9.5.1.

192

Содержание IGS-10020MT




















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание IGS-10020MT

Отзывы:

Бренды по названию

Популярные бренды

Planet IGS-10020MT, Руководство пользователя

Результаты поиска

Содержание IGS-10020MT

Отзывы:

Бренды по названию

Популярные бренды