Planet ICS-11 Series, Руководство пользователя

Страница: 45 / 74

User’s Manual of ICS-11x Serial Device Server Series
45
4.5.1 Serial setup
The serial setup screen is shown in Figure 4-5-2 .
Figure 4-5-2: Serial Setup Page Screenshot
Object Description
•
Description Used to distinguish the name of each serial port. It allows 1 to 15 characters (e.g. A-Z,
a-z, 0-9)
•
Baud Rate
The rate of data transmission to and from the attached serial device. It allows 50 bps to
921600 bps. The default is 921600 bps .
•
Stop Bits The stop bit follows the data and parity bits in serial communication. It indicates the end
of transmission. The default is 1 .
•
Data Bits
Indicates the number of the bits in a transmitted data package. The allowed value is
5 , 6 , 7 , 8 and default value is 8 .
•
Parity This parameter controls the error checking mode. It support five modes and default
value is none .

Even

Odd

None

Space

Mark
•
Interface
The device server supports three interfaces. The default value is RS-232 .

RS-232

RS-422

RS-485 2-Wire

RS-485 4-Wire
•
Flow Control The method is used to suspend and resume data transmission to ensure that data is not
lost. It supports four methods and default value is none .

None

RTS/CTS

Xon/Xoff

DTR/DSR