User’s Manual of ICS-10x
-55-
The page includes the following fields:
SMTP Setup
Enable SMTP
To Enable SMTP function. The default value is
“Disable”
.
SMTP Port
Set port number of SMTP service.
The default number is
“25”
.
SMTP Server Address
Type the SMTP server name or the IP address of the SMTP server address
.
Enable
If authentication is required when an e-mail is sent
Username
Enter your login name for the SMTP Server.
SMTP Login Information
Password
Enter your password for the SMTP Server.
Mail to
Enter the receiver’s e-mail address.
Mail from
Enter the sender’s e-mail address. This address is used for reply e-mails.
Log-Fail Warning
Subject
Enter the subject/title of the e-mail.
The default subject is
“[ICS-10x]Login Fail Warming”
.
Message Body
Enter the message of the e-mail.
The default subject is
“ICS-10x web Login Fail.”
.
OP Change Warning
Subject
Enter the subject/title of the e-mail.
The default subject is
“[ICS-10x]Operation Mode Change Warming”
.
Message Body
Enter the message of the e-mail.
The default subject is
“ICS-10x Operation Mode Change.”
.
Reboot Warning
Subject
Enter the subject/title of the e-mail.
The default subject is
“[ICS-10x]Device Reboot Warming”
.
Message Body
Enter the message of the e-mail.
The default subject is
“ICS-10x Device Reboot.”
.
■
Logout
Press this function; the web interface will go back to login screen. The screens in Figure 4-54 and Figure 4-55 appear.
Figure 4-54
Logout dialogues screen
