![Planet ICA-HM620 Скачать руководство пользователя страница 62](http://html1.mh-extra.com/html/planet/ica-hm620/ica-hm620_user-manual_1562521062.webp)
When motion is detected, the signals will be displayed on the Motion window as shown below.
Detailed settings of Motion Detection are described as follows:
Motion Detection
You will be able to turn on/off Motion Detection in System section. Default setting is Off.
Motion Detection Setting
Users could adjust various parameters of Motion Detection in this section.
•
Sampling pixel interval [1-100]:
The default value is 10, which means system will take one sampling pixel for every 10 pixel.
•
Detection level [1-100]:
The default level is 10. The item is to set detection level for each sampling pixel; the smaller the value,
the more sensitive it is.
•
Sensitivity level [1-100]:
The default level is 80, which means if 20% or more sampling pixels are detected differently, system will
detect motion. The bigger the value, the more sensitive it is. Meanwhile, when the value is bigger, the
red horizontal line in the motion indication window will be lower accordingly.
•
Time interval (sec) [0-7200]:
The default interval is 10. The value is the interval between each detected motion.
-
62
-
Содержание ICA-HM620
Страница 1: ...User s Manual www PLANET com tw 0HJD 3L HO 3R 3OXV 6SHHG RPH QWHUQHW DPHUD ICA HM ...
Страница 20: ...Pin Definition 20 1 LINE_OUT 2 GND 3 LINE_IN ...
Страница 51: ...4 3 7 HTTP The HTTP setting can be found under this path System HTTP 51 ...
Страница 108: ...Step 3 Click Finish to close the DC Viewer installation page Then the IP Camera s Home page will display as follows 108 ...