2 Mega-pixel 35M IR Outdoor Box PoE IP Camera
ICA-HM351
17
ONLY use one power source, either from DC or
from 802.3af Power over Ethernet.
Audio Output
(Green, Line Out)
Connect a loud speaker to the IP camera. This is for voice
alert and two-way audio.
Microphone Input
(Pink, Audio In)
Connect a microphone to the IP camera.
Reset
(Factory Default)
This button is used to restore to all the factory default
settings.
DI/DO
The 6 pin terminal block includes 1 input port and 1 output
port.
Video Output
(BNC)
The Network Camera also provides composite video
output. The video output function is only for easy installation
to check viewing angle and focus. The output is not a
mega-pixel resolution. Furthermore, the video output is off
by default. To turn on video, please refer to
Setting\Camera\Picture chapter.
Terminal Block for I/O Connectors:
Name
Cable Color
Function
12V DC
1
12V DC, 50mA (maximum)
DI
2
Digital signal input
GND
3
GND
DO
4
Digital signal output
2.2 Hardware Installation
1. Attach the Camera to the included stand
2. Place the Camera on the ceiling or fix it onto wall
Use three screws to fix the Network Camera onto the ceiling or wall.
3. Plug an Ethernet cable into the Camera
Connect an Ethernet cable to the LAN socket located on the Network Camera’s bottom and
attach it to the network.
4. Connect the external power supply to Camera
Connect the attached power adapter to the DC power jack of the IP Camera.