Planet ICA-501 Скачать руководство пользователя страница 54

Страница: 54 / 76

2. Make sure that only you access this device at this moment

3. Disable Motion Detection function.

4. Select “

Firmware name

”

5. Select the Firmware binary file. (

Note

that

it must make sure

that the Firmware only applies to this device, once update, it
will be burned into FLASH ROM of system.

)

6. Once the firmware file was selected, select
“Upgrade”.

7. The upgrade progress information will be displayed

on the screen.

8. A message will be shown while the firmware

upgraded. Once the upgrading process completed,
the device will reboot the system automatically.

9. Please wait for 80 seconds, and then you can use IPWizard

to search the device again.

Warning!!!

The download firmware procedure cannot be interrupted. If the power

and/or network connection are broken during the download procedure, it might
possibly cause serious damage to the device.

Please be aware that you should not turn off the power during updating the firmware
and wait for finish message.

Furthermore, do not try to upgrade new firmware if it’s not necessary.

System Restart:

The device is restarted without changing any of the settings.

Содержание ICA-501













































































Результаты поиска

Содержание ICA-501

Отзывы:

Похожие инструкции для ICA-501

Бренды по названию

Популярные бренды

Planet ICA-501, Руководство пользователя

Результаты поиска

Содержание ICA-501

Отзывы:

Похожие инструкции для ICA-501

Бренды по названию

Популярные бренды