HD Ultra-mini Bullet IR IP Camera
ICA-3110
For data security reason, the authentication and encryption assurances are added
when developing SNMPv3. The user has to give not only the security name (the same as
"community name" in v1&v2c, or sometimes we call it "context name") but the password in
order to access the IP camera. Please set security name, authentication type,
authentication password, encryption type, encryption password of write and read
respectively. The password must be 8~64 bits in length.
Different from SNMPv1 and v2c, the user have to create an account when using SNMPv3.
In the account parameters, key in the security name and password you set in the camera to
get accessing.
SNMPv1/SNMPv2 Trap:
Trap is a mechanism that allows the managed device to send messages to manager
instead of waiting passively for polling from the manager. Specify the trap event. When
those events happen, the camera will send the ring message to the Trap Address, which is
usually the manager's IP address. Trap Community means the community that can receive the
trap message.
• Cold Start: The camera starts up or reboots.
• Setting changed: The SNMP setting is changed.
• Network Disconnected: The network connection was broken down. (The camera will send
trap messages after the network being connected again)
• V3 Authentication Failed: A SNMPv3 user account tries to get authentication but failed. (Due
to incorrect password or community)
• SD Insert / Remove: A Micro SD card is inserted or removed.
38
