3.7.2 Date & Time
You can setup the time setting of IR IP Camera, make it synchronized with PC or remote NTP
server. Also, you may select the correct time zone of your country.
Server Date
& Time:
Displays the date and time of the IR IP Camera
PC Time:
Displays the date and time of the connected PC
Manual setting:
Click this option to set time and date manually
Synchronize
with NTP:
Click this option if you want to synchronize the IR
IP Camera’s date and time with those of time
server called NTP server (Network Time
Protocol)
Adjust:
Synchronize
with PC:
Click this option to enable time synchronization
with PC time
NTP server name:
Type the host name or IP address or domain name of the NTP
server.
NTP sync. Interval:
Select an interval between 1 and 23 hours at which you want to
adjust the IR IP Camera’s time referring to NTP server
Time zone:
Set the time difference from Greenwich Mean Time in the area
where the IR IP Camera is installed.
Daylight saving:
Check this item to enable daylight saving adjustment.
Daylight Saving
Sets up the date and time of daylight saving start time.
49
