- 9 -
- 10 -
7. LED INDICATION
LED
Color
Description
PWR
Green
Lit: When +5VDC power detected.
Fiber LNK/ACT
Green
Lit: To indicate the link through that fiber port is successfully established.
Blink: Indicate that the Fiber port is actively sending or receiving data over that port.
TP LNK/ACT
Green
Lit: To indicate the link through that port is successfully established.
Blink: Indicate that the port is actively sending or receiving data over that port.
TP 1000
Green
Lit: When the port runs in 1000Mbps Full duplex.
Blink: When the port runs in 100Mbps Full duplex.
Off: When the port runs in 10Mbps Full duplex.
8. PRODUCT SPECIFICATION
The GT-80X comes with the following standard features:
Model
GT-802
GT-802S
GT-805A
GT-806A15
GT-806B15
GT-806A60
GT-806B60
Connector – Fiber
SC-type connector
SFP, LC type
SC-type connector (WDM) LX
Mode
Multi-mode
Single mode
Vary on module
Single mode
Fiber Maximum Distance
220m / 550m
10km
Vary on module
15km
60km
Connector - Copper
10/100/1000Mbps RJ-45
Modes
Full Duplex, auto-negotiation
Packet Forwarding Rate
(64bytes)
14880pps @10Mbps
148810pps @100Mbps
1488000pps @ 1000Mbps
LED indicators:
PWR, 1000, Fiber/LNK/ACT, TP/LNK/ACT
Protocols and Standards:
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3ab 1000Base-T
IEEE 802.3z 1000Base-SX/LX
Cable
10/100/1000Base-T:
1000Base-T-2-pair UTP Cat. 5/5e/6, up to 100m
1000Base-SX:
50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 220/550m
1000Base-LX:
9/125μm single-mode fiber optic cable, up to 10/15/60km
OAM
TS-1000, IEEE 802.3ah terminal
Jumbo Packet Size
9K
Dimensions
26 x 70 x 97mm (H x W x D)
Power
External power adaptor 5V 2A max.
EMI Compatibility:
FCC Class A, CE Certification Class A
Temperature:
Storage: -40°C ~ 70°C / Operating: 0°C ~ 50°C
Humidity:
5% ~90% non-condensing
Note
Connecting to the Gigabit Ethernet products, please refer to the device’s Technical Manual.
9. CABLE CONNECTION PARAMETER
The wiring details are as below:
Cables:
Standard
Fiber Type
Cable Specification
1000Base-SX(850nm)
Multi-mode
50/125μm or 62.5/125μm
1000Base-LX(1300nm)
Multi-mode
50/125μm or 62.5/125μm
Single-mode
9/125μm
Wiring Distances:
Standard
Fiber
Diameter (micron)
Modal Bandwidth (MHz * km)
Max. Distance (meters)
1000Base-SX
MM
62.5
62.5
50
50
100
200
400
500
220
275
500
550
1000Base-LX
MM
62.5
50
50
5
4
5
550
SM
9
N/A
5000*
Note
The Single-mode port (1000Base-LX port) of GT-802S, GT-805A, GT-806A15/B15 and GT-806A60/B60 is complied
with LX 5 kilometers and provides additional margin allowing for a 10/15/60 kilometers Gigabit Ethernet link on
single mode fiber.
