Planet FGSW-2620PVS, Руководство пользователя

Страница: 4 / 67

- 4 -
1. INTRODUCTION
1.1 Checklist
Check the contents of your package for following parts:
z
FGSW-2620PVS or FGSW-2612PVS x1
z
User's manual CD x1
z
Quick installation guide x1
z
Power cord x 1
z
Rubber feet x 4
z
Rack mount accessory x 1
If any of these pieces are missing or damaged, please contact your dealer immediately, if possible, retain the carton in-
cluding the original packing material, and use them against to repack the product in case there is a need to return it to us
for repair.
In the following section, the term
“Web Smart PoE Switch”
means the two Switch devices, ie. FGSW-2620PVS and
FGSW-2612PVS; term of
“switch”
can be any third switches.
1.2 About the Switch
The Web Smart PoE Switches provides 24 10/100Mbps Fast Ethernet ports and 2 Gigabit TP/SFP combo ports, the two
Gigabit ports either can be 1000Base-T for 10/100/1000Mbps or 1000Base-SX/LX through SFP (Small Factor Pluggable)
interface. The distance can be extended from 100 meters (TP), 550 meters (Multi-mode fiber), up to above 10/50/70/120
kilometers (Single-mode fiber).
Both Web Smart PoE Switches are equipped with non-blocking 8.8Gbps backplane greatly simplifies the tasks of upgrading
your LAN to cater for increased bandwidth demands. The PoE in-line power following the standard IEEE 802.3af, makes the
both Web Smart PoE Switches able to power on 12/24 PoE devices at the distance up to 100 meters through the 4-pair Cat
5/5e UTP wire.
For efficient management, the Web Smart PoE Switch is equipped with web interface. The two Web Smart PoE Switches
can be programmed for basic switch management functions such as port speed configuration, Port Trunking, Port-based
VLAN, Port Mirroring, QoS, bandwidth control, Access Control list and Misc Configuration.
The Web Smart PoE Switch provides port-based VLAN (including overlapping). The VLAN groups allowed on the 2 Web
Smart PoE Switches will be maximally up to 26 for port-based VLAN. Via supporting port trunking, the Web Smart PoE
Switch allows the operation of a high-speed trunk combining multiple ports. The Web Smart PoE Switch provides seven
groups of up to 8-ports for trunking, and it supports fail-over as well.
With its Auto-Negotiation capability, all the RJ-45/STP ports of Web Smart PoE Switch can be configured to speeds of
10/20Mbps or 100/200Mbps automatically. In addition, the product is equipped with the MDI/MDI-X auto detection for easily
plug and play connection, regardless of cabling types-straight through or crossover.