Planet ENW-3502-T, Руководство пользователя

Страница: 19 / 33

Chapter 6 Client Driver Installation
15
4. Turn off your computer and insert the ENW-3502-T Ethernet PC
Card into the PCMCIA socket. The card is keyed to go in one way
only. Then attach the network cable to the card.
5. Now turn your computer on and connect to your network. If you cannot
connect to the network, refer to the Appendix A and B.
6.2 The INSTALL Program
Before you can use your ENW-3502-T Ethernet PC Card , you need to
install and modify some files in your computer system. You can make
these changes manually, or you can let the INSTALL.EXE program do
them for you.
This section explains how you can use the INSTALL.EXE program to
install the enabler and the files needed by the network operating system.
6.2.1 Using the INSTALL Program
To run the INSTALL.EXE program, type
INSTALL
and press <
Enter
> at the
DOS prompt. You should see an opening screen which welcomes you to the
program and asks if you wish to continue.
Figure 6-2.1 Opening Screen
Press <
Enter
> to continue the installation.
PLANET ENW-3502-T Ethernet PC Card Installation Program
DO YOU WANT TO PROCEED?
Welcome to 10Mbps Ethernet Card Installation Program. INSTALL will set up
your 10Mbps Ethernet Card.
If you have your network operating system installed, please insert your Card in
any available PCMCIA slot on your computer and press <Enter> to continue.
Otherwise press <F3> to return to DOS.
<Enter> to continue <F3> to return to DOS