32
7.5 WDS Settings
Wireless Distribution System uses wireless media to communicate with other APs,
like the Ethernet does. To do this, you must set these APs in the same channel and
set MAC address of other APs which you want to communicate with in the table and
then enable the WDS.
The Wireless Distribution System (WDS) allows you to extend the range of your
wireless network by introducing one or more WDS-enabled devices into your wireless
network. You can only establish WDS links with WDS-enabled devices.
Parameter
Description
Enable WDS
Click the check box to enable wireless distribution system.
MAC Address
Fill in the MAC address of AP to register the wireless
distribution system access capability.
Comment
Fill in the comment tag for the registered AP.
Apply Changes
Click the
Apply Changes
button to register the AP to new
configuration setting.
Reset Click
the
Reset
button to abort change and recover the
previous configuration setting.
Set Security
Click button to configure wireless security like:
WEP(64bits), WEP(128bits), WPA(TKIP),
WPA2(AES)
or
None.