Planet CS-5800 Скачать руководство пользователя страница 131

Страница: 131 / 142

Gigabit Content Security Router User’s Manual

setting of Backup device should be the same as Master device. The Backup

device can keep DHCP functioning and there will be no LAN disconnection.

LAN IP of the backup

device

Input LAN IP of Master mode, which is backed up.

MAC Address of the

backup device

Input Master device MAC address, which is backed up.

Status

“Status- Normal” indicates the status is idle. Master device operates normally.

“Status- Backup” indicates the device takes over all the network transmitting. The

status will return to “Normal” when Master device boots normally and send a

message to the backup device. Then, the status will return to Normal, which the

backup device remains idle.

Two devices are operating simultaneously:

Item

Description

Operation-Master Mode

Besides operating network with another device, Master device is also the DHCP

server to issue LAN IP addresses. Although Slave device also supports outbound

linking, its DHCP server is disabled.

WAN Backup

(The Checked WANs

are not working in this

device.)

The checked WANs will works in the other device. For an example, if WAN1 and

WAN2 work in this device, and WAN3 and WAN4 work in the other device, WAN3

and WAN4 should be checked.

LAN Gateway Backup

Input LAN IP of Slave device. The IP should be different from LAN IP of Master

device.

MAC Address of the

backup device

Input LAN MAC of Slave device. It should be different from LAN MAC of Master

device.

- 125 -

Содержание CS-5800















































































































































Результаты поиска

Содержание CS-5800

Отзывы:

Похожие инструкции для CS-5800

Бренды по названию

Популярные бренды

Planet CS-5800, Руководство пользователя

Результаты поиска

Содержание CS-5800

Отзывы:

Похожие инструкции для CS-5800

Бренды по названию

Популярные бренды