Planet AND-4102, Руководство пользователя

Страница: 26 / 92

802.11n Wireless ADSL 2/2+ Router
ADN ‐ 4102
26
Field Description
VCI
The virtual channel between two points in an ATM network,
ranging from 32 to 65535 (1 to 31 are reserved for known
protocols)
Encapsulation You can choose
LLC
and
VC-Mux
.
Channel Mode
You can choose
Bridge
,
IPoE, PPPoE
,
PPPoA
,
1483
Routed
or
IPoA
.
Enable NAPT
Select it to enable Network Address Port Translation (NAPT)
function. If you do not select it and you want to access the
Internet normally, you must add a route on the uplink
equipment. Otherwise, the access to the Internet fails.
Normally, it is enabled.
Enable IGMP
You can enable or disable Internet Group Management
Protocol (IGMP) function.
PPP Settings
User Name
Enter the correct user name for PPP dial-up, which is
provided by your ISP.
Password
Enter the correct password for PPP dial-up, which is provided
by your ISP.
Type
You can choose
Continuous
,
Connect on Demand
, or
Manual
.
Idle Time (min)
If set the type to
Connect on Demand
, you need to enter the
idle timeout time. Within the preset minutes, if the router does
not detect the flow of the user continuously, the router
automatically disconnects the PPPoE connection.
WAN IP Settings
Type
You can choose
Fixed IP
or
DHCP
.
If select
Fixed IP
, you should enter the local IP address,
remote IP address and subnet mask.
If select
DHCP
, the router is a DHCP client, the WAN IP
address is assigned by the remote DHCP server.
Local IP Address Enter the IP address of WAN interface provided by your ISP.
Netmask Enter the subnet mask of the local IP address.
Unnumbered Select this checkbox to enable IP unnumbered function.
Add
After configuring the parameters of this page, click it to add
new PVC into the
Current ATM VC Table
.
Modify
Select PVC in the
Current ATM VC Table
, and modify the
parameters of this PVC. After finishing, click it to apply the
settings of this PVC.
WAN Interfaces Table
This table shows the existed PVCs. It shows the interface
name, channel mode, VPI/VCI, encapsulation mode, local IP
address, remote IP address and other information. The
maximum item of this table is eight.