ADE-4300/ADW-4300 User Guide
66
Incoming Rules (Inbound Services)
This screen is displayed when the "Add" or "Edit" button for Incoming Rules is clicked.
Figure 52: Inbound Services Screen
Data - Incoming Rules Screen
Inbound Services
Service
Select the desired Service. This determines which packets are
covered by this rule. If necessary, you can define a new Service on
the "Services" screen, by defining the protocols and port numbers
used by the Service.
Action
Select the desired action for packets covered by this rule:
·
ALLOW always
·
ALLOW by schedule, otherwise Block
·
BLOCK always
·
BLOCK by schedule, otherwise Allow
Note:
·
Any inbound traffic which is not allowed by rules you create will
be blocked by the Default rule.
·
BLOCK rules are only useful if the traffic is already covered by
an ALLOW rule. (That is, you wish to block a sub-set of traffic
which is currently allowed by another rule.)
·
To define the Schedule used in these selections, use the
"Schedule" screen.
Send to
LAN Server
Select the PC or Server on your LAN which will receive the in-
bound traffic covered by this rule.
WAN Users
These settings determine which packets are covered by the rule,
based on their source (WAN) IP address. Select the desired
option:
·
Any
- All IP addresses are covered by this rule.
·
Address range
- If this option is selected, you must enter the
