Planet ADN-4101, Руководство пользователя

Страница: 9 / 92

LED Color Status Description
Off The LAN connection is not established.
On The WLAN connection has been activated.
Blinks
Data is being transmitted through the
WLAN interface.
WLAN Green
Off The WLAN connection is not activated.
Blinks
WPS is activated and the device is waiting
for negotiation with the clients. WPS Green
Off WPS is not activated.
Rear Panel
Figure 2 Rear panel
The following table describes the interfaces and buttons of the device.
Interface/Button Description
LINE
RJ-11 interface, for connecting the interface of the
telephone set through the telephone cable.
LAN1,LAN2,
LAN3,LAN4
RJ-45 interface, for connecting the Ethernet interface of a
computer or an Ethernet device.
POWER
Power interface, for connecting the interface of the power
adapter.
RESET
Restore to factory defaults. To restore factory defaults,
keep the device powered on, push a paper clip into the
hole to press the button for over 3 seconds and then
release.
WPS/ WLAN

Press the button and hold it for 1 second, to enable
WLAN.

Press the button and hold it for 1 second to 3
seconds, it does not take effect.
3