background image

ADE-4300/ADW-4300 User Guide 

VPN Server Status Screen 

This screen is displayed when you click the VPN Server Status button on the Micro-
soft VPN screen.  

 

Figure 67: Microsoft VPN Status Screen 

Data - Microsoft VPN Status Screen 

Connection 
Table

 

This table contains the following data about each current con-
nection. 

• 

User Name

 – The login name. 

• 

Remote IP

 - The IP address of the remote client.  

• 

Local IP

 – ADE-4300/ADW-4300 will allocate a local IP 

address to remote client when user login. 

• 

Start Time

 – This displays the start time when remote client 

login to the ADE-4300/ADW-4300..  

• 

Action 

This column will contain a button which allows you 

to break (terminate) the PPTP connection. 

Server Log 

Auto Refresh 

Use this to Enable or Disable auto-refresh for this screen. If 
enabled, the screen will be updated every few seconds. 

The status bar on the bottom on the screen will indicate if auto-
refresh is enabled or disabled. 

View Log 

This displays details of each connection or connection attempt. 

You can use the Clear Log button to re-start the log, making new 
messages easier to read. 

 

Windows Client Setup 

To connect to the PPTP (VPN) Server in the VPN Broadband Gateway: 

• 

The Microsoft VPN feature in the VPN Broadband Gateway must be enabled and 
configured, as described in the previous section. 

• 

Each user must have a login (username and password) on the VPN client data-
base on the VPN Broadband Gateway. 

• 

The remote client PC must be configured as described in the following sections. 

• 

It is assumed that remote users have a Broadband (not dial-up) connection to the 
Internet. 

 

90 

Содержание ADE-4300A















































































































































Отзывы: