The following table describes the parameters of this page:
Field
Description
PVC Settings
the virtual path between
in an ATM network, and its valid value is from 0 to
en two points in an ATM network, ranging from 32 to
VPI
: Virtual Path Identifier (VPI) is
two points
255.
VCI
: Virtual Channel Identifier (VCI) is the virtual channel
betwe
65535 (0 to 31 is reserved for local management of ATM
traffic).
Encapsulation
LLC/SNAP
or
VC-Mux
.
Select the method of encapsulation provided by your ISP. You
can select
Channel Mode
(PPPoE)
,
PPP over ATM
Select the WAN connection type. You can select
1483 Bridged
,
1483 MER
,
PPP over Ethernet
(PPPoA)
, or
1483 Routed
. In this example,
1483 Routed
is
selected.
WAN IP Settings
ssigned by the uplink equipment, such as BAS.
Obtain an IP address automatically
: Obtain the DNS
server a
Use the following IP address
: Enter the static IP address
provided by your ISP.
Default Route
You can select
Enable
or
Disable
.
DNS Settings
ically
: IP address is assigned by the
need not to enter the IP
server address manually, select it and enter the
Obtain DNS Automat
office end automatically. You
address.
Use the following DNS server address
: If you want to enter
the DNS
related data.
After finishing the configuration, click
NEX
. The page shown in the following figure
appears.
T
26