Rear Panel of ADE-4400
Rear Panel Port and Button Definition
Connector
Description
POWER Button
The power button is for turn on or turns off the router.
Reset
The reset button can restore the default settings of device. To restore
factory defaults, keep the device powered on and push a paper clip into
the hole. Press down the button over 5 seconds and then release.
Power
Power connector with 12V DC, 0.5A
LAN
1-4
Router is successfully connected to a device through the corresponding
port (1, 2, 3, or 4). If the LED is flashing, the Router is actively sending or
receiving data over that port.
Line
The RJ-11 connector allows data communication between the modem
and the ADSL network through a twisted-pair phone wire.
12
