Planet ADE-3000, Быстрое руководство по установке

Страница: 6 / 6

5.Please select DNS. Enter the Default Gateway , Pref erred DNS
Server, Alternate DNS Server, then Click “Submit”.
6.Click Save Settings -> “Submit”. This ADSL Modem Roure will save these
parameter settings and restart automatically. It takes about 15 seconds.
Fi gure 5
8 9
Annex A
Figu re 6
7. Finished!
** Note: The default IP address of this ADSL Modem Router is 10.0.0.2. Please
keep the changed address in mind if you modify it. If you lose it, you can’t
access this Modem Router. The only solution is to reset this Router.
ADSL Modem Router Configuration Guide
* Encapsulation is based on the ISP configuration. It may be different for different ISPs and
countries.
Bridge Mode
(Dynamic IP) Router Mode
(Dynamic IP) Router Mode
(Static IP)
WAN Configuration
VC0 Enabled Yes Yes Yes
VC1 - VC7 Enabled No No No
VC0 Static IP Adress N/A (0.0.0.0) N/A (0.0.0.0) Provided by ISP
VC0 Subnet Mask N/A (0.0.0.0) N/A (0.0.0.0) Provided by ISP
WAN Advanced
Configuration
Encapsulation* 1483 Bridged IP LLC
PPPoE LLC / PPPoA
VCM
1483 Routed IP LLC
Bridge Enabled Disabled Disabled
PPP Service Name N/A Blank N/A
PPP User Name N/A Provided by ISP N/A
PPP Password N/A Provided by ISP N/A
DHCP client enable Check None Checked Check None
LAN Configuration
DHCP Server Not Checked Checked Checked
NAT Configuration
NAT Disabled NAPT NAPT
DNS Configuration
Default Gateway N/A (0.0.0.0)
N/A (Automatically
Assigned by ISP)
Provided by ISP
Preferred DNS Server N/A (0.0.0.0)
N/A (Automatically
Assigned by ISP)
Provided by ISP
Alternate DNS Server N/A (0.0.0.0)
N/A (Automatically
Assigned by ISP)
Provided by ISP
RIP Configuration
RIP Disabled Disabled Disabled