12
3.2 Configuration
In this screen, you can configure the wireless settings of WL-3560. After configuration,
please press
”
Apply
”
to save settings or
“
Cancel
”
to set again.
u
SSID:
The SSID must be identical for each clients and nodes in the wireless network.
u
Wireless Mode:
Click pull-down button and select the work mode below.
Ø
Ad-Hoc:
This mode indicates the peer-to-peer operation. All communication is
done from client to client without the use of an Access Point.
Ø
Infrastructure:
This operation mode requires the presence of an Access Point. All
communication is done via the Access Point.
u
AdHoc Band:
There are two bands available for selection
Ø
11B:
Allows user to set the 802.11b standard wireless network.
Ø
11G:
Allows user to set the 802.11g standard wireless network.
u
Channel:
Shows the number of the radio channel used for the networking.
u
Tx Rate (11B/G):
Shows the Data Transfer Rate. If Auto Mode is selected, the device will
choose the best transfer rate automatically.
u
Tx Rate (11A):
Preserved for future usage.
u
Power Mode:
Shows Power Management modes. There are two optional selections for
this mode.
Ø
Continuous Access Mode:
WL-3560 will always set in active mode.
Ø
Maximum Power Save:
WL-3560 will enter power saving mode when it is idle.
Ø
Power Save:
WL-3560 consumes the moderate level of power.
