manualshive.com logo in svg

Planet Networking & Communication WGSW-48000, Руководство пользователя

Поделиться
Скачать
Planet Networking & Communication WGSW-48000 Скачать руководство пользователя страница 62

User’s Manual of WGSW-48000 

 

 62

4.4.4 VLAN Setting   

The VLAN Setting screen contains fields for configuring ports to a VLAN. The port default VLAN ID (PVID) is configured on the 

Create VLAN screen. All untagged packets arriving to the device are tagged by the ports PVID. The VLAN Settings screen 

contains a Port Table for VLAN parameters for each port. Ports are assigned VLAN membership by selecting and configuring 

the presented configuration options, you can refer to 

Figure 4-4-2

. 

 

Figure 4-4-2 

VLAN Setting 

 

Understand nomenclature of the Switch 

■ 

IEEE 802.1Q Tagged and Untagged 

Every port on an 802.1Q compliant switch can be configured as tagged or untagged. 

•

 

Tagged:

 

Ports with tagging enabled will put the VID number, priority and other VLAN information into the 

header of all packets that flow into those ports. If a packet has previously been tagged, the port 

will not alter the packet, thus keeping the VLAN information intact. The VLAN information in the 

tag can then be used by other 802.1Q compliant devices on the network to make 

packet-forwarding decisions. 

•

 

Untagged:

 

Ports with untagging enabled will strip the 802.1Q tag from all packets that flow into those 

ports. If the packet doesn't have an 802.1Q VLAN tag, the port will not alter the packet. Thus, 

all packets received by and forwarded by an untagging port will have no 802.1Q VLAN 

information. (Remember that the PVID is only used internally within the Switch). Untagging is 

used to send packets from an 802.1Q-compliant network device to a non-compliant network 

device. 

Содержание WGSW-48000






































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды