User’s Manual of ICS-2x00T Serial Device Server Series
25
2.2.3 Wall Mount Plate Mounting
To install the
Industrial Serial Server
on the wall, please follow the instructions below.
Follow all the DIN-rail installation steps as shown in the example.
Step 1:
Remove the DIN-rail bracket from the
Industrial Serial Server
. Use the screwdriver to loosen the screws to remove the
DIN-rail.bracket.
Step 2:
Place the wall-mount plate on the rear panel of the
Industrial Serial Server
.
Step 3:
Use the screwdriver to screw the wall-mount plate on the
Industrial Serial Server
.
Step 4:
Use the hook holes at the corners of the wall mount plate to hang the
Industrial Serial Server
on the wall.
Step 5:
To remove the wall-mount plate, reverse the steps above.