Planet Networking & Communication ICA-HM100 страница 53 Скачать руководство пользователя

Страница: 53 / 90

2. Make sure that only you access this device at this moment

3. Disable Motion Detection function.

4. Select

“

Firmware name

”

5. Select the Firmware binary file.

Note :

That

it must make sure that the Firmware only applies to this device, once

update, it will be burned into FLASH ROM of system.

6. Once the firmware file was selected, select “

Upgrade

”.

7. The upgrade progress information will be displayed on the screen.

8. A message will be shown while the firmware upgraded. Once the upgrading

process completed, the device will reboot the system automatically.

9. Please wait for 80 seconds, and then you can use PLANET IPWizard to

search the device again.

Warning !!!

The download firmware procedure cannot be interrupted. If the power and/or network
connection are broken during the download procedure, it might possibly cause
serious damage to the device.

Please be aware that you should not turn off the power during updating the firmware
and wait for finish message.

Furthermore, do not try to upgrade new firmware if it’s not necessary.

System Restart

The device is restarted without changing any of the settings.

Содержание ICA-HM100



























































































Результаты поиска

Содержание ICA-HM100

Отзывы:

Похожие инструкции для ICA-HM100

Бренды по названию

Популярные бренды

Planet Networking & Communication ICA-HM100, Руководство пользователя

Результаты поиска

Содержание ICA-HM100

Отзывы:

Похожие инструкции для ICA-HM100

Бренды по названию

Популярные бренды