MAC address
Displays the Ethernet MAC address of the WLAN card. Note that user
can not change it.
Site survey
Click the “Refresh” button. It will refresh information window which list
is the result of a network scan. Access points with a disabled SSID
Broadcast will not appear unless the camera is associated with it. The
following information is provided:
Interface Select
“Wired (Ethernet) only” or “Auto – wired if cable connected, otherwise
wireless”:
Choose wired or wireless mode. However, note that wired is priority.
Type
To select one of WLAN modes from Infrastructure or Ad-Hoc mode.
Security mode
Shows which type of security the network uses. The device supports
three security methods: None, WEP, WPA_PSK, WPA2_PSK
Obtain DNS from
DHCP
Enable this checked box when a DHCP server is installed on the
network and provide DNS service.
SSID
This is the name of the wireless network the device is configured for.
The field accepts up to 32 alphanumeric characters. The name must be
exactly the same as that used in the wireless access point, or the
connection will not be established.
Leaving this field blank means the device will attempt to access the
33
