manualshive.com logo in svg

Planet Networking & Communication ICA-E5550V, Руководство пользователя

Поделиться
Скачать
Planet Networking & Communication ICA-E5550V Скачать руководство пользователя страница 63

 

 

5 Mega-pixel Vandalproof IR PoE IP Camera 

ICA-E5550V

 

 

 

63

SMTP Server 

SMTP servers

 can send email upon request from the IP device. The email can be a simple 

subject and text email, or attached with snapshot/video. You may set up two SMTP servers. 
The device will first attempt to send the message via the Primary email SMTP server. If the first 
attempt fails (after the maximum connecting time), the device will attempt to send it via the 
secondary SMTP server. If the device sends email successfully via the primary SMTP server, 
then it will not use the secondary SMTP server. 

 

 
To setup SMTP servers, make sure to enable the SMTP account and choose the proper 
Authentication type. There are many types available. The default is Login. We recommend you 
to use Auto Detection. Available authentication types include: Auto Detection, None, Login, 
Plain, Cram MD5, Digest MD5 and PoP Relay. Please also enter the User Name, Password, 
the email address displayed as sender (can be different than the user name), Network (SMTP 
server) address, Network (SMTP server) Port number and Max Connection time before 
timeout (in 

seconds

).  

 
After changing any of the items above, press 

Apply

 to save the changes. The Reset button 

undoes the changes that had just been made but not Applied yet. 
 

HTTP Server 

HTTP CGI servers

 are programs that run on web sites or many devices. They can be 

custom-programmed to perform a large variety of actions based upon the input. You can define 
which CGI server to connect to here, and the user / password required to log into the target 
server. The actual message/command is setup in the Notification messages/URL commands 
section. You may define two separate CGI servers. 

 

IP devices are also CGI servers. This means that IP devices can now issue commands to each 
other, which creates endless possibilities for highly coordinated response. The IP device can 
also give a loopback command to itself, in effect changing almost all possible settings 
dynamically. For detail on the commands used to control the cameras, please contact your 
customer representative. 

 

Содержание ICA-E5550V


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды