
3 Mega-pixel Remote Focus Bullet IR IP Camera
ICA-3350P
43
Motion detection is performed by examining the movement of objects in rectangular motion
detection area. You can define up to 3 motion detection areas.
Enable Motion
Detection
Check this box to enable motion detection.
Enable
(Window 1 to
Window 3)
Check this box to enable this motion detection window. You can
select window 1 to 3 to enable up to 3 motion detection windows.
When a motion detection window is enabled, a rectangular window
will appear on camera’s view, with its title on the top.
‐
To move / resize a motion detection window:
‐
Move: Use the mouse to drag the title text.
‐
Resize: Use the mouse to drag the four corners (upper-left/right,
lower-left/right) to resize it. If you only want to adjust width or
height, drag the four sidebars (top, bottom, left, and right).
Title
(Window 1 to
Window 3)
Input characters in title field to change motion detection area’s title
text so you can identify it. Please note that you have to click
‘Apply’
button and the text will change.
Percentage
Select the percentage of pixel change that will trigger motion
detection alert. Select a lower percentage and you can detect tiny
changes in motion detection area.
Sensitivity
Select the sensitivity level that will trigger motion detection alert.
Select a higher sensitivity and you can detect tiny changes in motion
detection area.
When you finish with the above settings, click the ‘Apply’ button to save changes