3 Mega-pixel Remote Focus Bullet IR IP Camera
ICA-3350P
38
Manual:
User can configure sensor exposure to fixed setting.
Mirror
Check
‘Vertical’
or
‘Horizontal’
box to flip the image vertically or
horizontally; this will help to correct the orientation of image when IP
camera is hanged bottom-up by camera holder. You can click both
‘Vertical’
and
‘Horizontal’
boxes at the same time.
Flickerless
Check the box to set the function as enable.
Power Line
Frequency
Select the frequency of power line of the place you’re using this IP
camera. This will help to reduce the flicker of certain lights in the
image.
Condition (AWB)
Select the condition that you’ll be using this IP camera from the
dropdown menu.
Auto:
It will detect environment automatically.
Outdoor:
For outdoor environment use.
Indoor:
For indoor environment use.
B/W:
You’ll be using this IP camera in dark places where lights are
insufficient.
Tungsten:
For low color temperature environment use.
Manual:
User can configure the setting.
TV Out
Click “Enable” box to enable its “VIDEO OUT” function for
connections and video sending to TV monitors or DVRs.
IR-cut(Day/Night)
An IR-cut filter is built in this IP camera to reduce the effect of IR
lights, and most of IR lights are coming from the sunlight.
You can select the behavior or IR-cut filter:
Auto:
IR filter will act automatically. If you don’t know if you should
use IR filter, select this option.
Day mode (Color):
IR filter is always on.
Night mode (B/W):
IR filter is always off.
Day
IR-cut filter will only be switched on when there’s sunlight. You can
define the starting and ending time when IR-cut filter should be
switched on by selecting ‘Schedule’.
WDR
This function is to provide clear images even under back light
circumstances.
BLC
(Back Light
Compensation)
Enable it to allow the camera to adjust the exposure of the entire
image to properly expose the subject in the foreground.
When you finish with the above settings, click the
‘Apply’
button to save changes.