background image

dollars. You must be converting all prices on your billing 

page into American dollars (U.S. dollars). For details, see 

section 3-2-8 Credit Service. The credit card function only 

supports the American dollars. 

 

Figure 3-48 Credit Service Setting Screen 

 

Figure 3-49 Error Dialog Box (Credit Card Service=Enable) 

Item 

Default 

Description 

Time to Finish 

Enable 

The subscriber can access Internet only one time with one account. 

Once subscriber login, the pre-defined usage time will start until run 

out even the subscriber stop to access the Internet before run out. 

Accumulation 

Accumulation 

Disable  The subscriber can access Internet many times with one account. The 

system can keep and accumulate every single usage time until the 

pre-defined usage time run out. 

Idle Time Out 

5 Min(s)  The idle time out valid range is 1-1440. If the idle time out is set as 5 

minutes, it means if the account doesn’t send packet in 5 minutes, the 

account will logout automatically. 

Wireless Subscriber Gateway 

 

47

Содержание Hot Spot WSG-403






























































































































Отзывы: