To add a frequency to your devices click the “Update” link on the left hand side. Type in the “Centre Frequency” in KHz
and click “Update”.
This will now take you back to the status tab. The signal strength and data lock indicators should show as green. Please
note it can take up to a minute for these values to change.
Once you have these settings entered, go to Streaming > Channels.
Please note it may take up to 1 minute for the initial detection of channels to complete.
Once detection is complete you should see a list of all the channels available across all tuner devices you have setup.
To stream a particular channel simply enter a multicast IP address and a port and click the “Start” button for that
channel. This saves the configuration and will start to broadcast the channel over your network. To stop a channel
broadcasting simply click the stop button for the required channel.
If you require any assistance with these settings please contact Planet eStream support.
In order to find out the channel set and frequency information of your Freeview transmitter you can go to http://www.digitaluk.co.uk/ and enter
your postcode into the coverage checker. You will need to select detailed view.