13
18
When the AF switching mode is selected, the radio checks the signal strength of the
AF all the time. The interval of checking time of each AFs depends on the signal
strength of the current station, from a few minute for the strong station to a few
seconds for the weak station. Every time that a new AF is stronger than the current
station, it switches over to that frequency for very short time, and the
NEW FREQUENCY is displayed for 1-2 second.
Because the mute time of the AF switching or the checking time is very short, it is
almost inaudible in case of normal program. (When AF flash on LCD, it will search
for the stronger RDS station. If AF and TP flash on LCD, it can only search for the
traffic announcement station).
In FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY function can only
receive and save the RDS program.
10. TA [TRAFFIC ANNOUNCEMENT] BUTTON
Press the TA button shortly to turn on TA search mode.
When traffic announcement is transmitted:
1) If the unit is in Disc Play mode, it will switch to radio mode temporarily.
2) Temporarily switch over to an EON linked station when EON detects a traffic
announcement on that other program, and TA, TP will be displayed on LCD
* TA interruption function:
The current traffic announcement is cancelled by pressing TA button shortly.
* When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or saved
only when traffic program identification code has been received.
4. Media Device Operation
1. Enter Media mode
When inserting the plug into your device , it will
automatically switch modes and display the menu on
touch screen as right.
You can also use MODE button or Mode Menu to enter
the model.
2. Play audio files
: Tap it can pause playback:
: Tap it can stop playback.
: Tap one of them can switch on between the speed
levels of fast backward or forward.
: Tap one of them can select next or previous track.
: Tap it to turn volume up and down.
: Tap it to change the audio and video playback.
Media menu
During slow forward, press the PLAY button to resume normal playback.
The function is only for video.
5.9 Display still frame step by step
If the unit is currently playing video, press the TEL button consecutively
to display still frame step by step.
Press the PLAY button to resume normal playback.
5.10 Playback Repeatedly
5.10.1 ONE/ALL Repeat
1. In the mode of DVD playback:
Press the RPT button to select REP CHAPTER, REP TITLE, REP ALL
or REP OFF.
2. In the mode of VCD(PBC OFF)/CD playback:
press the RPT button to select REP ONE, REP ALL or OFF.
When it is in the state of PBC ON, during VCD disc playing, the RPT
button is not available.
3. In the mode of MP3/WMA playback:
Press the RPT button to select REP ONE, REP DIR, REP ALL or OFF.
5.10.2 A-B Repeat
Press the
A-B
button
if you want to repeat a specific segment on a disc
that you define:
1. Press the
A-B
button at a point (A) where you want it to be the start point
of the repeat segment. Press the
A-B
button again at a point (B) where you
want it to be the terminal point of the repeat segment. Then it will play the
segment repeatedly.
2. To cancel the A-B repeat mode and resume normal playback, press the
A-B
button for the third time.
Note:
During VCD/MP3/WMA/CD playback, points A and B must be within the
same track.
Содержание PI9760
Страница 1: ......
