INSTRUCTIONS
04
12. Number Button 6 /
In playback mode, press the button to adjust the angle of screen.
13. AUX
To input external audio.
14. Dual (front and rear) USB
Insert USB removable device so as to read audio/video files.
Warning: You can only use either front or rear USB at a time. Never connect both
front and rear USB at the same time! This could cause malfunctions.
15. IR
To receive infrared signal from the remote control.
16.
When there is a disc in the unit, press the button to eject the disc.
17. MIC Input
BT MIC input.
18. SD
Insert SD card, the unit will play the files automatically.
19. RESET
Press this button and this unit will be restored to the initial state.
15
INSTRUCTIONS
Version
interface below to check the software version number
of DISC/MCU/TFT/BT (The version information is displayed
please prevail in kind.)
Touch calibration
If the touch position is biased, you may touch the icon “Calibrate” for calibration.
Touch the icon
[ ]in setting interface to find the setting bar[
],
and then touch any icon
[ ]to enter the following calibrating interface.
Touching methods
Use touch pen to click the center of “+” icon, and move along with center of “+” icon so
as to calibrate the screen. It shall automatically save data and exit after screen calibration.
Please accurately click all positions on screen, or the accuracy of touch calibration shall
be affected.
Touch the icon [ ]in setting interface to enter the
Содержание P9759B
Страница 1: ......
