Push-To-Talk
Press the button (
VOL
knob) to access to smartphones voice assistant
capability via Bluetooth.
Adjust Menu Options (SEL)
• Press and hold the
SEL
button to access the audio / function, then press the
SEL
button repeatedly to cycle through the following audio /function:
- ILL MID/HI/LOW: This receiver is equipped with 3 brightness settings.
- BASS/TREBLE:-7, -6, ~, 1, 0, +1,~, +6, +7
Note: BASS and TREBLE settings are only enabled when EQ setting is turned OFF.
- BALANCE:L7, L6,~, L1, L=R, R1,~,R6, R7
- FADER:R7, R6, ~, R1, 0, F1, ~ ,F6, F7
- EQ(Equalizer) Setting: OFF, CLASS, ROCK, POP, FLAT
- Loudness: LOUD ON/OFF
- DX/LOCAL: Enables or disables the local broadcast mode (LOCAL).
- Stereo/Mono: Switches between MONO and STEREO reception mode for
radio frequencies.
- CLOCK 12/24: Select between 12 hours and 24 hours display.
Note: If 12 hour display is selected , AM= Morning; PM= Afternoon
- AREA US/EU: This car radio is equipped the USA / Europe frequency.
Rotate the
VOL
knob to switch between the USA and Europe frequency.
The system will change the frequency setting in about 3 seconds.
• Rotate the
VOL
knob to adjust the selected item.
Setting the Clock
Press the
CLK
button to display time. Press and hold the
CLK
button, the
hours digits start flashing on the display. Set hours by rotating the
VOL
knob.
Briefly press the
CLK
button. The minute digits start flashing.
Set minutes by rotating the
VOL
knob.
Finally press the
CLK
button to confirm your settings.
Mute On/Off
In power on mode, briefly press the
MUTE
button to toggle mute on or off.
USB Port
Auxiliary Input Jack
Reset
Push the
RESET
button with a thin object with a pointed end to reset all
parameters to factory default settings.This function may be used when the
LCD does not display normally or sound is distorted, or when any of controls
are disabled.
General Operation
