Planar PXL2780MW, Руководство пользователя

Страница: 11 / 24

Quick Installation
1.
Connect either DVI or Display Port Video source from the monitor to the computer, using
the included DVI-dual link or Display Port cable. Make sure both monitor and computer are
powered OFF.
Note: VGA and HDMI cables may be sourced separately from a cable supplier.
2. Connect the audio cable from audio output of computer to the audio input of the monitor.
3. Connect the earphone to the earphone output terminal of the monitor. (Earphone sold
separately).
4. Connect power cord to a properly grounded AC outlet, and then to the monitor.
5. Power-ON computer and then POWER-ON the monitor.
6. Set the timing mode on your computer. Recommended resolution and refresh rate is 2560 x
1440 @ 60Hz.
Note: VGA and HDMI inputs do not support 2560 x 1440 resolution. It is only supported on DVI input, using a DVI
dual link cable, and Display Port input, using Display Port cable.
Figure 1:
PC
Earphone
(not supplied)
VGA cable
(not supplied)
Audio cable
Display Port cable
DVI cable
HDMI cable
(not supplied)
Power cable
9