34
Installing the Wall mount plate
This monitor satisfies the specifications of the Wall mount plate or
the interchange device.
Wall mount plate (Separate purchase)
- Be sure to use screws and a wall mount that meet
VESA standards.
- Using screws longer than those recommended might
damage the product.
- Using screws that do not meet VESA standards might
either damage the product or result in it coming away
from the wall.We will not be held responsible for any
damage resulting from failure to follow these
instructions.
Kensington Security Slot
Connected to a locking cable that can be purchased
separately at most computer stores.
1
.
After moving the product to face
downward, make sure to place it on a
soft cloth or a cushion to avoid surface
damage.
2
.
Separate the head and the stand with
the use of a screwdriver.
3
.
Install the Wall mount plate.
< Screw Mounting Interface Dimension >
Hole spacing : 100 mm x 100 mm
NOTE
VESA compatible only with respect to screw mounting interface dimensions and mounting screw
specifications
Please use VESA standard as below.
* 784.8 mm and under (30.9 inch)
- Wall Mount Pad Thickness : 2.6 mm
- Screw : 4.0 mm x Pitch 0.7 mm x Length 10 mm
* 787.4 mm and above (31.0 inch)
- Please use VESA standard wall mount pad and screws.
Wall Mount pad
