Planar PDP 42, Руководство по эксплуатации продукта

Страница: 24 / 55

2 4
·
Powering the PDP
·
Selecting input source
Prior to using the PDP
Insert the power plug.
Connect external equipment properly.
·
Please use only after carefully reading this manual.
·
Check the power connection to the AC outlet and the connection of AC input to the PDP.
Power On/ Off
·
To turn the PDP on :
Press the "Main Power" button of PDP and then press the "Standby" button.
·
To turn the PDP off :
Press "Standby" button on the PDP and then press the "Main Power" button.
Turning the main power switch off will save energy. It is the same as unplugging the power cord.
If ON Time setting is set, the main power should be ON.
·
To turn on/off by remote controller :
Press the POWER button of remote controller (If the PDP is not turned on, check that the "Main Power"
button on the PDP main body is turned on. The main power indicator will light up red if turned on).
CAUTION -
After turning off the main Power, please wait at least more than 3 seconds to turn the
main power back on.