Planar PDP 42, Руководство по эксплуатации продукта

Страница: 21 / 55

2 1
How to watch DTV
1. Turn on the PDP monitor and press on the remote controller.
2. Use to select component and then press .
3. When connecting DVI-I terminal, use to select RGB1(Analog) and then press .
4. Turn the DTV receiver on and select the channel that you want.
· DTV video output of 480p or 720p will show the clear and detail image of screen.
Connecting to the DVI-I terminal
Some of DTV receivers (Set-Top-Box) have an RGB connector (D-sub 15 pin) instead of a component
output. The DVI adapter, which provides this connection terminal for the PDP, may be used for this con-
nection.
Connect the DVI adapter into the VGA cable and connect to the PDP DVI-I input terminal. Connect the
other end of the cable to D-sub output terminal of DTV receiver.
Connect audio cable from the audio output terminal of DTV receiver to the DVI-I audio input terminal of
the PDP.