EL480.240-PR2/PR3 Users Manual
12
Mechanical Characteristics
Table 7. Mechanical Characteristics.
Display External Dimensions
millimeters (inches)
width
189.4 (6.91) nominal
height
108.0 (4.14) nominal
depth
21.5 (0.85) nominal
Weight (typical)
310 g (10.9 oz), nominal
Fill Factor
50.2%
Display Active Area
millimeters (inches)
width
146.31 (5.76) nominal
height
73.11 (2.88) nominal
Pixel Size
width
0.22 (0.0085) nominal
height
0.22 (0.0085) nominal
Pixel Pitch
horizontal .31 (0.012) nominal
vertical
.31 (0.012) nominal
Component Envelope
The component envelope shown in Figure 4 illustrates the distance
components extend behind the display. Tall components do not necessarily fill
this area. Planar reserves the right to relocate components
within
the
constraints of the component envelope without prior customer notification.
For this reason, Planar advises users to design enclosure components to be
outside the component envelope.
An air gap of at least 5 mm is recommended to dissipate heat from display
components. Device designers will need to consider their specific system
requirements to determine the necessary spacing.
