background image

 

   

EL640.480-AM Operations Manual (020-0351-00C) 

13 

Optical Performance 

Table 6. Optical Characteristics. 

Luminance 

L

on

 (areal), min 

L

on

 (areal), typ 

L

off

 (areal), max 

AM1 
AM8 IN/ET/ETL 

40 cd/m² 
35 cd/m² 

65 cd/m² 
49 cd/m² 

0.3 cd/m² 
0.3 cd/m² 

Minimum and Typical: Center, 120 Hz frame rate 
Maximum: Center and four corners, 120 Hz frame rate 

Non-uniformity 

AM1 
AM8 IN/ET/ETL 

35% 
26% 

All pixels fully on @120 Hz 
Maximum difference two of five points, 
using the formula: 
BNU%=[1- (min_lum/max_lum)] x 100% 

Luminance Variation (Temperature) 

Maximum 

15% 

Across operating temperature range 

Luminance Variation (Time)

 

Maximum 
AM1 
AM8 IN/ET/ETL 

 

20% 
10% 

 
10,000 hours at 25

°

C ambient 

10,000 hours at 25

°

C ambient 

Viewing Angle 

Minimum 

  160

°

 

 

Contrast Ratio 

Minimum 

Typical 

 

AM1 
AM8 IN/ET/ETL 

19:1 
35:1  

40:1 
70:1 

 

Minimum: @ 500 lux ambient, @ 120 Hz frame rate 

Dimming 

There are two standard methods for dimming the AM displays. Frame rate 
dimming allows the brightness of the display to be lowered proportionally by 
reducing the frame rate. Analog dimming allows the brightness to be reduced 
with an external, user supplied potentiometer or electronic circuitry. The 
brightness range for analog dimming is from 100% to nearly 5% of the full 
brightness. 

Frame rate dimming is performed within the application by lowering the 
frame rate of the video input signals. Because brightness is proportional to 
refresh rate, the display can be dimmed by adding pauses between every 
horizontal period. 

The lowest possible frame rate (brightness) is dependent on the perceived 
flicker of the displayed image, but will most likely be around 60 Hz. For more 
information on frame rate dimming please see Planar Application Note 120. 

The analog dimming feature utilizes a 50k ohm logarithmic external 
potentiometer, allowing manual control of the display’s brightness. Analog 
dimming is standard on the AM8 IN and AM8 ET displays. The typical current 
for minimum brightness is 220 µA. 

Содержание ICEBrite EL VGA Displays EL640.480-AM






















Отзывы: