EL320.240.36-HB Operations Manual (020-0346-00A)
6
Connector
The display uses the Samtec EHT-110-01-S-D or equivalent locking connector.
The mating connector is in the Samtec TCSD family of cable strips. The proper
connector, user-specified cable length and connector configuration is supplied
as a single unit. Consult your Samtec representative (1-800-SAMTEC9) for the
cable/connector options. Compatibility with non-Samtec equivalents should
be verified before use.
Figure 1. Data/Power Connector
Table 3. J1 Connector Pinouts.
Pin Signal Description
Pin Signal Description
1 V
H
+12 V Power
2
V
H
+12 V Power
3 Selftest Selftest
Input
1
4
SCAN
Scan rate control
5 V
L
+5 V Power
6
GND
Ground
7 VS Vertical
Sync 8 GND
Ground
9 HS Horizontal
Sync
10
GND
Ground
11 VCLK
Video
Clock 12 GND
Ground
13 VID
0
Video
Data
14
GND Ground
15 VID
1
Video
Data
16
GND Ground
17 VID
2
Video
Data
18
GND Ground
19 VID
3
Video
Data
20
GND Ground
1
Connect pin 3 to ground for normal display operation.
J1
J2
Pin 1
Pin 1
Key
Pin 2
Pin 1
Key
(Viewed from top of connector)
(Viewed from
back of display)
