Planar Dome RX/PCI, Руководство по установке, Страница: 41 / 98

Installing the Windows NT 4.0 Driver | 31
9
The Change Display dialog box appears, with these options:
DOME imaging systems R4/PCI
DOME imaging systems R5/PCI
10 Select the desired driver, and click OK.
The Third-party Drivers dialog box appears, prompting you:
Do you wish to proceed?
11 Click Yes.
A progress bar appears. Then the Installing Driver dialog box
appears with this message:
The drivers were successfully installed.
12 Click OK, then click Close on the Display Type dialog box
and on the Display Properties dialog box.
The System Settings Change dialog box appears,
prompting you:
Do you want to restart your computer now?
13 Click Yes.
14
Select Windows NT Workstation Version 4.00 [VGA mode],
and then configure your display settings as described in the
next section.