Planar Dome RX/PCI, Руководство по установке, Страница: 20 / 98

10 | Installing the Board and Display
Installing multiple boards
Repeat the installation instructions on page 8 for each board.
Remember these tips when you are installing multiple boards:
• You can install as many RX/PCI boards as your system’s
power supply and available PCI slots can support
(Windows 2000, Windows XP, and Solaris).
• The Windows NT driver supports up to eight boards
(16 screens) of the same type. You cannot mix DOME board
types, but you can mix single- and dual-headed boards.
• Each board requires less than 5 amps of +5V.
• For PCs, you must disable VGA mode on all but one RX/PCI
board if multiple boards are in use. See “To disable VGA
mode” on page 6.
• In Sun workstations, you can install different boards in the
same system.