VS17 Display
24
QUICK LINKS
Contents
FCC Compliance Statement
Index
Ordering Parts
Product Information
Regulatory Compliance
Warranty
GETTING STARTED
About the Display
Unpack Display
Identify Components
Adjust Orientation/Angle
INSTALLING THE DISPLAY
Connect Power
Connect Video
Connect Audio
Connect Touch Screen
Power Management System
USING THE CONTROLS
Overview
Hot Key Functions
OSD Menu
Function Menus
OSD Lockout
APPENDIXES
Technical Information
Supported Timing
Troubleshooting
Troubleshooting
Problem
Solution
Display indicates “Over Range”
The frequency range is out of display specifications, or the
incoming resolution is higher than 1280 x 1024. The video
data turns off and this warning message appears.
In analog mode, check that the scanning frequency is in
a horizontal range of 24 to 80 kHz and a vertical range from
50 to 75 Hz. Or, check that the display resolution is set to
1280 x 1024 or lower.
In digital mode, check that the scanning frequency is in
a horizontal range of 30 to 80 kHz and a vertical range from
50 to 75 Hz. Or check that the display resolution is set to
1280 x 1024 or lower.
Display indicates “No Video”
There is no video-input signal from the source video port.
The onscreen display shows this message.
Check that the video cable is connected securely to the computer
and the display.
