3
SET
your display to the correct input mode
(VGA/HDMI)
→
You should see the player boot up screen.
4
WAIT
while player boots up (up to
60
seconds
)
→
once you see “
Welcome
” on screen,
the unit is ready for content update or
menu configuration.
5
PLUG IN
a USB keyboard to the unit’s
USB port
→
the player will enter the
graphical menu system
in approx. 30 sec.
6
NAVIGATE
the menus
using your keyboard arrows
(up), (down), (left), (right) to move the selection, (Space
bar) to select, (Enter) to confirm, and (ESC) to cancel
→
find and set the correct time/date AND time zone
.
IMPORTANT
: time zone must be set correctly in the menus or via
management software for scheduled playback.
→
(Wireless model only) Using the USB keyboard, select a wireless
network and provide security information to connect to your wireless
access point.
→
(OPTIONAL)
Set a Password
in the menus to prevent unauthorized
changes.
IMPORTANT
: setting a password will hide the menus. To re-
enter the menu, press CTRL-ALT-DEL and enter the password. If you
forget the password, see
Reset player to factory defaults.
7
SAVE
settings
and exit the menu, then
REMOVE
the USB keyboard.
→
The player will reboot with new settings in place. Settings are now
retained even if you remove the power.
→
For advanced player configuration, such as static IP, proxy server,
time server, display option, and security settings, visit:
www.PlanarDigitalSignage.com/ContentSmart
for more information.