Planar Bay Cat X SN-4620-1080, Руководство пользователя

Страница: 70 / 159

63
3.7 Other Operations
To “disable” the remote control
To prevent unauthorized use and adjustment of the Bay
Cat X, either hide the remote or disable the remote control
function with an RS232 command. For more information,
see “Controlling with RS232 commands” on page 62.
Input system caches
Settings (position, aspect ratio, brightness/contrast,
color balance) are saved automatically 5 seconds after you
make a change. The system caches the last ten settings.
Whenever a picture is shown from a new source with the
same resolution as a previous picture, the system recalls the
previous settings rather than readjust everything. This hap-
pens regardless of the check marks in
Auto Adjust
Options . (See also “Auto Setup Options” on page 56 .)
For example, suppose you display an NTSC picture in
the composite input and set the Aspect Ratio and Position
to your liking. Then you feed in a composite PAL picture
and set a different Aspect Ratio and a different Position. If
you then feed in a new NTSC picture, the previous NTSC
picture’s settings for Aspect Ratio and Position will be
used.