Plamen Authentic 35 N, Инструкция по установке и эксплуатации

Страница: 39 / 68

Access to the Ashtray
Maintenance of the stove body
To maintain the glasses translucent, it is recommended to clean them regularly with a wet cloth and
of a worn newspaper paper - The glasses need to be cold during the cleaning operation .
The appliance must be cleaned regularly together with the connecting pipe and the flue pipe.
Remove all deposits from the combustion chamber and clean the grate area.
The vitro ceramic glass can only be cleaned using a soft cloth and stove glass cleaner, available
from your Dealer. DO NOT USE ABRASIVES
The vitro ceramic glass resists a temperature of 750°C.
If the glass should be broken, it is recommended that only an original factory replacement should
be fitted.
Check that there are no obstructions before relighting after a long period of disuse.
The appliance must not be used with a flue serving several appliances.
To maintain the grates ventilation free of any obstruction,
For enamelled finishes, the stove body can be cleaned using a soft cloth either dry, or slightly
damp with a very mild detergent.
NEVER CLEAN ENAMEL SURFACES WHILST THE STOVE IS HOT.
The cast iron body panels of non-enamelled stoves can be cleaned with a proprietary stove cleaner
or re-sprayed / touched up using a stove paint. These products are available from your Dealer.
Recommendations
This room heater is a high heat producing appliance and may cause severe burns if touched on the
glass front door or on top directly over the burner.
The stove may still be HOT even when fire has burnt out .
To get access to the stove, to control the air flow thru the button or
even to open the door of the ashtray, wear always the provided
insulated glove
Keep children away from the stove
Authentic 35 N
39