Plamen International SP 850 N, Технические инструкции

Страница: 15 / 36

The solid fuel burning cookstove ŠP 850 N is one of a series of PLAMEN cookstoves,
designed to meet your needs in the best possible way. Please READ CAREFULLY THESE
INSTRUCTIONS in order to achieve the best results with the very first use of this cookstove.
The appearance of the cookstove is illustrated on the cover page of these Instructions.
Main component parts of the cookstove are made of enameled or galvanized sheet steel and of
high quality cast iron.
The cookstove is available with left- or right side flue connection. Therefore, when placing
an order for a cookstove or its spare parts, please indicate the full model reference number, eg.:
cookstove ŠP 850 D indicates that this particular cookstove is designed with the flue
connection on the right, viewed from the front side of the cookstove.
Technical data
Dimensions H x W x D = 82,5 x 84,5 x 60 cm
Weight: 1 33 kg
Rated output: 8 kW
Flue connection: rear and top: Ø 1 20 mm
Height of rear flue conn. - from the floor: H=725mm
Required negative pressure in the chimney: 10 - 20 Pa
Mean flue gas temperature at the flue conn.: 220 °C
Flue gas flow at rated output: 7.5 g/s
Recommended fuel loads for rated output:
wood and wood briquettes
2- 3 kg/h
coal briquettes 1.5 - 2 kg/h
Optimum log size:
perimeter
20-30 cm
length 25 - 30 cm
Positioning and Installation
When installing the cookstove, make sure that relevant local, national and European
regulations are fully observed.
After having unpacked the cookstove, inspect it carefully for possible damages in
transport. Any such damages should be immediately reported, because late claims will not be
taken into consideration. To install the cover, insert the hinge pins into the respective guides on
the top plate.
In the log drawer, you will find accessories: 0-06 C leaning showel , 88 Serving
handle, 158 Protective glove logo PLAMEN.
In the log drawer, you will find a handrail which should be fixed to the top frame as shown
on the Figure 1.
Install the flue collar in its position making sure that the connection between the
cookstove and chimney is firm and tight. The cookstove is connected to the chimney with a
standard flue pipe dia. 1
20 mm. The flue pipes should have adequate rise at all places. Do not
connect the cookstove to a chimney to which another appliance has already been connected.
Make sure that the chimney is free from any cracks and damages.
The cookstove should be installed in a room with sufficient fresh air to support the
combustion. If an exhauster (hood) or similar air-consuming unit is installed in the same room,
regular inflow of fresh air should be provided through a separate opening, protected with a
non-clogging grid.
15